We tested the valve system of the Hyperlink Drum (HLD) with a steel container.
A slight pressure of 0.05 MPa was applied to a gray 15L drum (top and bottom plates 1.0 mm x body 0.08 mm)and water was extracted in 34 seconds. Even with a steel container, there was no deformation at all when the pressure was around 0.05 MPa.
This container was used as a container for semiconductors and electronic components, but by using valves and couplers, it can be useful for extracting and filling more delicate contents.
See "Product explanation video" on our website.
Hyper link Drum (hereinafter referred to as HLD) as one of the domestic core business
About 30 years ago, in order to prevent anyone from opening the lid arbitrarily, DOW CHEMICAL changed the drum materials made by MICRO MATIC which are used for major Japanese agricultural industries nowadays. Our product drums are used stainless materials which are popularly used for chemical and lubricant industries.
State of contents according to cut model of HLD. A tube is attached to the HLD valve, so it is not necessary to insert a tube like an electric pump.
cut model & extraction kit
When extracting, a dedicated coupler is attached to the valve, air or nitrogen is sealed in the extraction kit corresponding to the electric pump, the liquid is extruded and discharged from the tube
As a way to use HLD, extrude liquid with a small pressure with air, nitrogen or the like, and extract through a tube. Since HLD's operational time is only half than the electric pump, the work efficiency will be greatly improved.
It is an image of the scene where engine oil is put in the oil tank